You are currently viewing How To Prepare Your Surfaces For Commercial Painting

How To Prepare Your Surfaces For Commercial Painting

Commercial painting is an excellent way to make your building more attractive. That leads to a positive mindset among employees and creates an excellent first impression on customers.

When preparing your surfaces for commercial painting, it’s essential to consider the substrate used because different materials come with different preparation and coating processes.

Remember, understanding the surface before painting is critical to the coating’s long-term performance. Using the incorrect surface preparation or coating can cause issues where the paint peels or reacts with the old layer. If you ask us, it’s best to get in touch with Attention to Detail Painters serving Castle Pines, CO, for a flawless painting experience.

Let’s look at the most common internal and external surfaces and how you need to go about preparing them:

What are the most common types of surfaces?

Identifying the most common substrates in your building will assist you in project planning and surface preparation for painting.

You’ll be able to provide a more detailed project description to the contractors you’re requesting for estimates. Plus, you can take care of minor tasks like filling nail holes, reducing the time painters must spend on this little detail.

As far as internal surfaces go, Gyprock is the most commonly painted. You can also come across door frames, VJ boards, etc.

There’s more variety in terms of external surfaces. The most commonly painted materials include weatherboards, fiber cement sheets, off-form concrete, timber for trims and doors, etc.

How to prepare different types of surfaces for commercial painting

SurfacePreparation Required
Gyprock  For brand new Gyprock, make sure the frame’s seams and screws have been plastered and sanded back to a smooth finish. Before applying a sealer, the surface should be thoroughly cleaned, and the walls should be filed in between finishing coats.
Timber frames and doors  In the case of new timber frames and doors, you’ll have to fill all the nail holes before applying acrylic primer and the finishing coats.
Rendered masonry  When it comes to new masonry, check whether the render has adequately cured before applying primer and the finishing coats.
Weatherboard  If the weatherboard is new or recently replaced and the timber is raw, you must first apply a suitable primer before applying your finishing coats.
VJ boardsBefore applying a sealer coat, you need to fill all the nail holes and wipe the surface clean of any dust.
FC and CFC sheetsNew FC and CFC sheets have to be screwed and patched where necessary, and the surface must be wiped off any dust before applying a primer.
Off-form concreteRemove the curing agent before applying primer and the finishing coats for new off-form concrete.  

Wrapping Things Up

The key to the longevity of any commercial painting project is proper preparation and the use of an appropriate coating method for the substrate. When it comes to preparing the surfaces of your building for painting, it’s essential to keep in mind that there are no shortcuts to work done correctly.

What’s more important is that, for a risk-free, regret-free, and flawless painting experience in Castle Pines, CO, Attention to Detail Painters is your best bet! Get a free estimate.